Config Commands - Cisco Aironet Wave 2 Cli Command Reference Manual

config Commands

• config ap client-trace, on page 28
• config ap client-trace filter, on page 30
• config ap client-trace output, on page 31
• config boot baudrate, on page 32
• config boot break, on page 33
• config boot crashkernel, on page 34
• config boot debug-memory, on page 35
• config boot manual, on page 36
• config boot path, on page 37
• config cts debug enforcement host_ip, on page 38
• config cts debug enforcement rate, on page 39
• config cts debug enforcement permissions, on page 40
• config cts debug enforcement protocol, on page 41
Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7
27