Undebug - Cisco Aironet Wave 2 Cli Command Reference Manual

debug Commands

undebug

To disable debugging on the access point, use the undebug command.
undebug [all]
Syntax Description
a l l Disables all debugging messages.
Privileged EXEC (#)
Command Modes
Command History
Release
8.1.111.0
Examples
The following example shows how to disable all debugging messages:
cisco-wave2-ap# undebug all
Modification
This command was
introduced.
Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7
undebug
79