Show Cdp - Cisco Aironet Wave 2 Cli Command Reference Manual

show cdp

show cdp

To display CDP options, use the show cdp command.
show cdp {entry device device-name |inline_power |interface |neighbors |traffic}
Syntax Description
entry device device-name
inline_power
interface
neighbors
traffic
Privileged EXEC (#)
Command Modes
Command History
Release
8.1.111.0
The following example shows how to view information for a specific neighbor entry:
cisco-wave2-ap# show cdp entry device mydevice
Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7
94
Information for specific neighbor entry whose name you must enter
Inline power negotiation information
CDP interface status and configuration
CDP neighbor entries
CDP statistics
Modification
This command was
introduced.
show Commands