Debug Rrm Reports - Cisco Aironet Wave 2 Cli Command Reference Manual

debug Commands

debug rrm reports

To enable RRM reports debugging, use the debug rrm reports command.

debug rrm reports

Syntax Description
reports
Privileged EXEC (#)
Command Modes
Command History
Release
8.1.111.0
Examples
The following example shows how to enable debugging of RRM reports:
cisco-wave2-ap# debug rrm reports
Enables RRM report debugging
Modification
This command was
introduced.
Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7
debug rrm reports
69