Show Dhcp - Cisco Aironet Wave 2 Cli Command Reference Manual

show dhcp

show dhcp

To view the status of Dynamic Host Configuration Protocol (DHCP), use the show dhcp command.
show dhcp {lease | servers}
Syntax Description
lease
servers
User EXEC (>)
Command Modes
Privileged EXEC (#)
Command History
Release
8.1.111.0
The following example shows how to view the status of DHCP addresses leased from a server:
cisco-wave2-ap# show dhcp lease
Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7
106
Displays the DHCP addresses leased from a server
Displays the known DHCP servers
Modification
This command was
introduced.
show Commands