Show Rrm - Cisco Aironet Wave 2 Cli Command Reference Manual

show rrm

show rrm

To view the Radio Resource Management (RRM) properties, use the show rrm command.
show rrm {hyperlocation [level1-list ]|neighbor-list [details ]|receive {configuration |statistics}}
Syntax Description
hyperlocation level1-list
neighbor-list
receive
rogue
Privileged EXEC (#)
Command Modes
Command History
Release
8.1.111.0
Usage Guidelines
The following example shows how to view the level 1 channel scan list in Hyperlocation:
cisco-wave2-ap# show rrm hyperlocation level1-list
Level-1 List for 2.4GHz Band
===================================
Channel
-------
Level-1 List for 5GHz Band
===================================
Channel
-------
Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7
126
Displays status of Cisco Hyperlocation on the AP
Displays neighbor-list statistics
Receive signal strength indicator (RSSI) of the AP
Displays rogue-related information
Modification
This command was
introduced.
Width Serving MAC
----- -----------------
Width Serving MAC
----- -----------------
Max Clients
-----------
Max Clients
-----------
show Commands