Show Lacp - Cisco Aironet Wave 2 Cli Command Reference Manual

show lacp

show lacp

To view the Link Aggregation Control Protocol (LACP) options, use the show lacp command.
show lacp {counters |internal |neighbors}
Syntax Description
counters
internal
neighbors
Privileged EXEC (#)
Command Modes
Command History
Release
8.1.111.0
The following example shows how to view the LACP traffic information:
cisco-wave2-ap# show lacp counters
Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7
118
Displays traffic information
Displays internal information
Displays LACP neighbor entries
Modification
This command was
introduced.
show Commands