Debug Sip - Cisco Aironet Wave 2 Cli Command Reference Manual

debug sip

debug sip

To enable session initiation protocol (SIP) debugging, use the debug sip command.
debug sip {all | tx | rx}
Syntax Description
all
tx
rx
Privileged EXEC (#)
Command Modes
Command History
Release
8.1.111.0
Examples
The following example shows how to enable debugging of SIP transmissions and reception:
cisco-wave2-ap# debug sip all
Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7
70
Enabling SIP transmission and reception debugging
Enabling SIP transmission debugging
Enabling SIP reception debugging
Modification
This command was
introduced.
debug Commands