debug Commands
debug capwap client
To enable debugging of CAPWAP clients, use the debug capwap client command.
debug capwap client {ble | detail | efficient-upgrade | error | events | flexconnect | info
| keepalive | payload | pmtu | qos | reassembly | security}
Syntax Description
ble
detail
efficient-upgrade
error
events
flexconnect
info
keepalive
payload
pmtu
qos
reassembly
security
Privileged EXEC (#)
Command Modes
Command History
Release
8.1.111.0
Examples
The following example shows how to enable debugging of CAPWAP client detail:
cisco-wave2-ap# debug capwap client detail
Enables debugging of CAPWAP BLE detail
Enables debugging of CAPWAP detail
Enables debugging of image predownload
Enables debugging of CAPWAP error
Enables debugging of CAPWAP events
Enables debugging of CAPWAP FlexConnect mode event
Enables debugging of CAPWAP information
Enables debugging of CAPWAP keepalive
Enables debugging of CAPWAP payload
Enables debugging of CAPWAP path MTU
Enables debugging of CAPWAP QoS
Enables debugging of CAPWAP reassembly
Enables debugging of CAPWAP security
Modification
This command was
introduced.
Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7
debug capwap client
47