Debug Memory - Cisco Aironet Wave 2 Cli Command Reference Manual

debug Commands

debug memory

To debug memory, use the debug memory command.
debug memory {clear | save}
Syntax Description
clear
save
Privileged EXEC (#)
Command Modes
Command History
Release
8.1.111.0
Examples
The following example shows how to remove memory debug upon boot-up:
cisco-wave2-ap# debug memory clear
Removes memory debug upon boot-up
Saves current debug level and applies it upon following boots
Modification
This command was
introduced.
Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7

debug memory

61