Debug Memory Pool Alloc - Cisco Aironet Wave 2 Cli Command Reference Manual

debug Commands

debug memory pool alloc

To debug memory pool allocation calls, use the debug memory pool alloc command.
debug memory pool alloc {all | name pool-name}
| start}
Syntax Description
all
name pool-name
diff
realtime interval 1-1000000-seconds
start
Privileged EXEC (#)
Command Modes
Command History
Release
8.1.111.0
Examples
The following example shows how to configure the start of the debug for all memory pool allocation
calls:
cisco-wave2-ap# debug memory pool alloc all start
Modification
This command was
introduced.
Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7
{diff | realtime interval 1-1000000-seconds
Configures debug for all memory pool allocation calls
Configures debug for a specific memory pool's allocation call
Shows memory pool debug allocation call difference in detail
Configures realtime interval for the memory pool allocation calls
Starts the debug for the memory pool allocation calls

debug memory pool alloc

63