Table Of Contents - Hermle Z 206 A Instruction Manual

1 PRODUCT DESCRIPTION
1.1 Usage in accordance with safety standards
1.1.1 General Information
1.1.1.1 Hazards and precautions
1.1.1.2 Brief description
1.1.1.3 Safety Standards
1.1.1.4 Extent of supply
1.1.1.5 Warranty
1.2 Installation
1.2.1 Installation of the centrifuge
1.2.1.1 Unpacking the centrifuge
1.2.1.2 Space requirements
1.2.1.3 Installation
1.3 Technical Data
1.4 Conformity Declaration
1.5 Basic Setup and the "operating data" mode
1.5.1 Access to the "basic adjustments" mode
1.5.2 Call up of the "operating data" mode
2 OPERATION
2.1 Installation of rotors
2.1.1 Mounting and loading angle rotors
2.1.2 Mounting and loading swing out rotors
2.1.3 Overloading of rotors
2.1.4 Removing the rotors
2.2 Operation
2.2.1 Power switch
2.2.2 Lid release
2.2.3 Lid lock
2.2.4 Pre-selection of speed/RCF-value
2.2.5 Pre-selection of running time
2.2.6 Pre-selection of brake intensity and acceleration
2.2.7 Starting the centrifuge
2.2.8 "Stop" key
2.3 Safety features
2.3.1 Imbalance detection
3 MAINTENANCE
3.1 Service and Maintenance
3.1.1 Maintenance and cleaning
3.1.2 Glass breakage
3.1.3 Disinfection of Alu-rotors
3.1.4 Disinfection of PP-rotors
4 TROUBLE SHOOTING
4.1 Error messages: Cause / Solution
4.2 Survey of possible error messages and their solutions
4.2.1 Lid release during power failure
4.2.2 Discription of the error message system
4.2.3 Error messages
Page 2 of 24 INSTRUCTION MANUAL Z 206 A
CONTENTS
www.bioecoms.com