Pre-Selection Of Running Time - Hermle Z 206 A Instruction Manual

2.2.5 Pre-selection of running time

The running time can be pre-selected in three different ranges from 10 seconds up to 99 hours
59 minutes.
1. Range from 10 seconds up to 59 minutes 50 seconds in steps of 10 seconds
2. Range from 1 hour up to 99 hours 59 minutes in steps of 1 minutes
3. Range continuous run "cont", which can be interupted by the key "stop" (2).
The running time can be pre- selected with the lid opened or closed.
To activate the setting of the running time press the key "time" (4).
In the display "time" flashes the indication "m : s" or "h : m" (15), depending on the previous setting. To
set the desired value use the adjusting knob (7). After exceeding of 59 min 50 sec the indication (15)
changes automatically to "h : m". After exceeding of 99 hours 59 min the word "cont" appears in the
display "time". That continuous run can only be interupted by pressing the key "stop" (2).
The display shows always the remaining running time.
15
Photo 14
Page 17 of 24
4
INSTRUCTION MANUAL Z 206 A
2 OPERATION
15
2
7
www.bioecoms.com