Physical Dimensions; Led Display; Led Behavior - Dell EMC S4112F-ON Installation Manual

Physical dimensions

The S4112–ON series (S4112F-ON and S4112T-ON), has the following physical dimensions:
• 209 x 450 x 41.25 mm (W x D x H)
• 8.2 x 17.7 x 1.75 inches (W x D x H)

LED display

The S4112–ON Series (S4112F-ON and S4112T-ON), contains LED displays on the I/O side of the switch. This section describes open
networking installation environment (ONIE) LED behaviors. Some LED behaviors may change after you install your software.

LED behavior

The following S4112–ON Series switch LED behavior displays during ONIE operations:
Figure 7. S4112F–ON AC and DC I/O-side LEDs
1 SFP+ port LED
3 Stack ID
5 System LED
7 Fan LED
9 RJ-45/RS-232 LED
NOTE: Some LED behaviors change after you install your software.
10 S4112–ON Series switch
2 QSFP28 port LED
4 Master LED
6 Power LED
8 Locator LED/System beacon