Table of Contents
Advertisement
Figure 19. S4112-ON Series release latches
Figure 20. S4112-ON Series release arrow
Optics installation
The S4112-ON Series (S4112F-ON adn S4112T-ON) switch has the following optic configurations:
Table 7. S4112-ON Series optic configurations
Platform
S4112F-ON
S4112T-ON
For a list of supported optics, see the S4112–ON Series data sheet at
representative.
CAUTION:
ESD damage can occur if components are mishandled. Always wear an ESD-preventive wrist or heel ground strap
when handling the S4112–ON Series and its components.
WARNING:
When working with optical fibers, follow all warning labels and always wear eye protection. Never look directly into
the end of a terminated or unterminated fiber or connector as it may cause eye damage.
1
Position the optic so it is in the correct position.
The optic has a key that prevents it from being inserted incorrectly.
2
Insert the optic into the port until it gently snaps into place.
NOTE:
When you cable the ports, be sure not to interfere with the airflow from the small vent holes above and below the
ports.
Description
•
12 fixed 1/10GbE SFP+ optical ports
•
3 fixed 1/100GbE QSFP28 optical ports
•
3 fixed 1/100GbE QSFP28 optical ports
www.dell.com/support
or contact your Dell EMC sales
S4112–ON Series installation
25
Hide quick links:
Advertisement
Table of Contents
