Inverter Installation
Inverter modules should be fitted, tested and in place prior to delivery for ease of install.
HV900112 Installation
BMS module should be fitted, tested and in place prior to delivery for ease of install.
Battery Installation
Note: When installing the battery, be careful not to touch the cables inside
the cabinet.
Follow the following steps to install the battery:
Step 1: Remove the battery from
packaging.
Step 3: Put the batteries in the cabinet with the serial number sequence of 01, 02, 03...12 as
the above figure shows.
__________________________________________________________________________________
Installation
Step 2: Check the Battery Number on the cover
6
7
8
1
9
2
3
10
4
11
5
12
Alpha ESS Co., Ltd.
Your Smart Energy
Page 29 of 59