Table of Contents
Advertisement
Your Smart Energy
at the main BESS switch/isolator and any local BESS switch/isolator in case of accidents
caused by false switching. Warning signs or tapes should be also located near the operational
areas. Keys of the system must then be pulled out after maintenance or operation and kept
safe.
Measuring Equipment
For ensuring the electrical parameters to match requirements, related measuring equipment is
required when the system is being connected or tested.
Electrostatic Protection
Contact or improper operation or testing of the printed circuit board or any other electrostatic-
sensitive device (ESD) components may result in damage to the device. Unnecessary contact
should be avoided.
Moisture Protection
It is very likely that moisture may cause damages to the system.
Do not open the cabinet door when the humidity is larger than 85%.
Repair or maintaining activities in wet weather should be avoided or limited.
Minimum Personal Protection Equipment
For the safety of operators to the system, personal protective equipment is required. During the
operation, following protective equipment is required:
No.
Item
1
Work clothes
2
Protective shoes
3
Protective glasses
When doing maintenance works such as checking cables or wires, measuring voltage,
replacing small electrical parts or cleaning modules and brackets, as minimum the following
protective equipment is required:
No.
Item
1
Work clothes
2
Protective shoes
3
Protective glasses
4
Insulated gloves
__________________________________________________________________________________
Page 14 of 59
Safety Instructions
Alpha ESS Co., Ltd.
Notes
Notes
For touching live parts
- Quick Links:
- System Schematic
- With Pv
Hide quick links:
Advertisement
Table of Contents
