Additional Options; Malfunctions/Troubleshooting - Otto Bock skippi Instructions For Use Manual

Malfunctions/troubleshooting

7.7

Additional options

„ Joystick accessories (e.g. tetra fork; STICK S80; soft-
ball; golfball)
„ Headrest mounting kit (e.g. NUTEC; Mygo; Squiggles):
For mounting to the back tube
„ Control panel guard: Metal guard for impact protection
„ Bumper bar
„ Manual horn
„ Pennant
„ Tray
„ Tray centre control unit (only as custom fabrication)
„ Puncture-proof tyres: Solid rubber tyres
These and other optional add-on components are included on
the order form and in the wheelchair accessories catalogue.
76 | Ottobock
8 Malfunctions/troubleshooting
CAUTION
Risk of accidents and injury due to uncontrolled move-
ments of the power wheelchair. Uncontrolled movements
can occur during the operation of the power wheelchair as
a result of malfunctions. In this case, please contact your
authorised specialist dealer immediately.
INFORMATION
During use of the power wheelchair, electrical discharges
(high voltage with low current; discharge via the user) may
occur which are caused by factors such as friction. How-
ever, these do not represent a health hazard.
The resulting discomfort can be prevented by customisa-
tion measures (attaching a mechanical discharge contact /
grounding strap to the wheelchair frame). The user's envi-
ronment must be taken into consideration.
Electrostatic discharge may also occur if the power wheel-
chair is equipped with puncture-proof tyres. Retrofitting the
wheelchair with pneumatic tyres can correct this problem.
Skippi