Icx35-Hwc Diagnostic Counter Reset - ProSoft Technology ICX35-HWC User Manual

EtherNet/IP and SMS Text Messaging
User Manual
* These parameters can be reset to 0.
1
These tags provide a placeholder value when the ICX35-HWC WAN/LAN is disconnected or
in a Connecting state.
Tip: To check if a new SMS text message is received, monitor the
ICX35.STATUS.SMS_MSGs_Received controller tag. This tag increments by 1 for every SMS text
message received. You must toggle the ICX35.CONTROL.Get_Status controller tag for updates.

6.3.2 ICX35-HWC Diagnostic Counter Reset

The following ICX35-HWC status parameters can be reset to 0. They cannot be
individually reset.
ICX35.STATUS.Min_RSSI
ICX35.STATUS.Max_RSSI
ICX35.STATUS.Cell_Net_Disconnects
ICX35.STATUS.LAN_KBytes_Sent
ICX35.STATUS.LAN_KBytes_Received
ICX35.STATUS.WAN_KBytes_Sent
ICX35.STATUS.WAN_KBytes_Received
ICX35.STATUS.SMS_MSGs_Sent
ICX35.STATUS.SMS_MSGs_Received
ICX35.STATUS.SMS_MSGs_Rx_Free_Buffer_Counter
Enter '1' in the ICX35.CONTROL.Reset_Status controller tag and press
1
E
NTER
Page 104 of 137
.
ICX35-HWC ♦ Industrial Cellular Gateway
ProSoft Technology, Inc.
October 26, 2018
3G/4G LTE