LinMot E1100-CO Drive Data Sheet & Installation Manual page 18

S3: Bus Termination
S3
X5: COM
case
DSUB-9 (m) RS232:
Page 18 of 27
Switch 4: Interface on/off (All field bus interfaces)
Switch 3: Termination CAN on/off
Switch 2: Termination RS485 on/off
Switch 1: RS232 (switch "off" / RS485 "on") Select serial RS232 or RS485
Factory setting: all switches "off"
To use field bus functionality the switch S3.4 has to be set to position "on"!
In position "off" the field bus is deactivated.
1 RS485_Tx+ Y
2 RS232_Tx
3 RS232_Rx
4 RS485_Rx+ A
5 GND
6 RS485_Rx- B
7 RS485_Tx- Z
8 CAN_L
9 CAN_H
Shield
Configuration on all drives: use 1:1 connection cable to PC with only pins 2, 3 and 5
connected. Use LinMot RS configuration cable (Art.-No. 0150-3307). Cable length < 30m
Installation Guide E1100 23/08/2018
Installation Guide E1100
NTI AG/ LinMot/