Table of Contents
Advertisement
7 PROGRAMMING FOR EXECUTING THE MASTER FUNCTION
7.6 Obtaining Error Information
7 - 34
This section explains an example of a sequence program that obtains the error
information for the master function.
(1)
Device list
Device
M60
X03
Y13
D500
D501
D502
(2)
Program example
Description
Error Reset Command
Error Set Signal for Master Function
Error Reset Request for Master Function
Error Information for Master Function
Node No. of Error Node
Error Code
MELSEC-Q
Reference
section
3.3.2 (4)
3.4.3
Reads error information
for master function from buffer memory.
Node No. of error node
Error information for master function
Error code
Sets Error Reset Request
for Master Function to ON.
Sets Error Reset Request
for Master Function to OFF.
7 - 34
―
Advertisement
Table of Contents
Troubleshooting
