6 UTILITY PACKAGE (GX Configurator-DN)
6.4 Auto Refresh
6 - 13
[Purpose]
Configure the QJ71DN91's buffer memory for automatic refresh.
This auto refresh setting eliminates the need for reading and writing by sequence
programs.
[Operating procedure]
"Start I/O No.* "
* Enter the start I/O No. in hexadecimal.
[Setting screen]
POINT
Do not edit or write any data that were set by GX Configurator-DN Version 1.15R or
later with or to GX Configurator-DN Version 1.14Q or earlier.
Doing so will corrupt the set data.
If a numerical value is entered accidentally, press Cancel .
"Module type"
"Module model name"
MELSEC-Q
Auto refresh
6 - 13