Mitsubishi Electric QJ71DN91 User Manual page 103

6 UTILITY PACKAGE (GX Configurator-DN)
6 - 3
(6) Number of parameters that can be set in GX Configurator-DN
When multiple intelligent function modules are mounted, the number of
parameters set must not exceed the following limit.
When intelligent function modules
are installed to:
Q00J/Q00/Q01CPU
Q02/Q02H/Q06H/Q12H/Q25HCPU
Q12PH/Q25PHCPU
Q02UCPU
Q03UD/Q04UDH/Q06UDHCPU
For example, if multiple intelligent function modules are installed to the
Q25HCPU, configure the settings in GX Configurator so that the number of
parameters set for all the intelligent function modules does not exceed the limit of
the Q25HCPU. Calculate the total number of parameter settings separately for
the initial setting and for the auto refresh setting.
The number of parameters that can be set for one module in GX Configurator-DN
is as shown below.
Target module
QJ71DN91
Example) Counting the number of parameter settings in Auto refresh setting
Maximum number of parameter settings
Initial setting
512
512
512
2048
4096
Initial setting
0 (Not used)
This one row is counted as one setting.
Blank rows are not counted.
Count up all the setting items on this
screen, and add the total to the number
of settings for other intelligent
function modules to get a grand total.
MELSEC-Q
Auto refresh setting
256
256
256
1024
2048
Auto refresh setting
18 (Max.)
6 - 3