Table of Contents
Advertisement
7 PROGRAMMING FOR EXECUTING THE MASTER FUNCTION
7 - 12
3)
When the current value for "Y17: Request for Saving Parameters to
Flash ROM" is "Save Request", set "OFF" for it.
Select "OFF"
4)
Click the Close button.
(c)
[2. Set Auto Configuration Operation.]
Clicking the Operation Setting button on the [Monitor/Test] screen will
display the [1. Set Auto Configuration Operation.] screen.
Follow the setting instructions.
1)
Set the auto configuration operation. (Refer to Section 3.4.5.)
To specify All configuration, set "003F" for "Auto Configuration
Operation Setting".
Select "003F"
2)
Click the Close button.
Execute test button
Execute test button
MELSEC-Q
1)
2)
7 - 12
Advertisement
Table of Contents
Troubleshooting
