Table of Contents
Advertisement
Connect the IO-Link USB master to the receiver.
CSL 710 with IO-Link interface:
Connect the IO-Link USB master to interface X1 on the receiver with the connection cable (see
figure 0.1).
Connect the IO-Link USB master to interface X1 on the receiver with the connection cable (see
figure 11.2).
The connection cable is not included in the delivery contents and must be ordered separately if needed
(see chapter 16.4).
1
2
3
4
Figure 11.2: CSL 710 connection to the IO-Link USB master
11.2.5 Installing the DTM and IODD
Prerequisites:
• The light curtain is connected to the PC via the IO-Link USB master.
• FDT frame and driver for IO-Link USB master are installed on the PC.
Select the IO-Link device DTM (User Interface) installation option and follow the instructions on the
screen.
The Installation Wizard installs the DTM and the IO Device Description (IODD) for the light curtain.
DTM and IODD for all IO-Link devices currently available from Leuze electronic are installed.
Sensor Studio
11.3
Starting the
Prerequisites:
• The light curtain has been mounted (see chapter 6) and connected (see chapter 7) correctly.
Sensor Studio
• The
Sensor Studio configuration software and IO-Link USB master").
• The light curtain is connected to the PC via the IO-Link USB master (see chapter 11.2 "Installing
Sensor Studio configuration software and IO-Link USB master").
Sensor Studio
Start the
The Mode selection of the Project Wizard is displayed automatically or under the File menu item.
Leuze electronic
1
2
Receiver
IO-Link USB master
Plug-in power supply unit
PC
configuration software
configuration software is installed on the PC (see chapter 11.2 "Installing
configuration software by double-clicking the
Connecting to a PC – Sensor Studio
3
CSL 710
4
Sensor Studio
icon (
).
71
Advertisement
Table of Contents
