Table of Contents
Advertisement
10
Example configurations
10.1
Example configuration - Mapping of beams 1 ... 32 to output pin 2
10.1.1 Configuration of area/output mapping (general)
The following table shows an example configuration for an area mapping to an output. In this example,
beams 1 ... 32 are to be applied to output pin 2 on interface X1.
Map beams 1 ... 32 to area 01.
Description / variables
Display detailed area configuration
Value: 0 = area 01
Configuration of area 01
Area
Value: 1 = active
Logical behavior of the area Value: 0
Start beam of the area
Value:
End beam of the area
Value:
Number of active beams for
area ON
Value:
Number of active beams for
area OFF
Value:
Switching behavior
Value: 0 = normal - light
switching (i.e., switching if
beams are free)
Switching behavior
Value: 1 = inverted - dark
switching (i.e., switching if
beams are interrupted)
Configure pin 2 as area output.
Description / variables
Configuration of digital inputs/outputs
IO Function
Map pin 2 to configured area 1.
Digital Output 2 Settings
Area mapping 8 ... 1
(OR combination)
Possible additional area-to-pin configurations:
Map pin 2 to configured area 8.
Leuze electronic
Value: 1
Normal - light switching
Inverted - dark switching
(i.e., switching if beams are
(i.e., switching if beams are
free)
interrupted)
1
1
32
32
32
32
31
31
Output 1 if all beams are
Output 0 if all beams are
free.
free or 1 ... 31 beams are
Output 0 if a beam is inter-
free.
rupted or if more than a
Output 1 only if 32 beams
beam are interrupted.
are interrupted.
Output 0 if all beams are
Output 1 if all beams are
free.
free or 1 ... 31 beams are
Output 1 if one or more
free.
beams are interrupted.
Output 0 only if 32 beams
are interrupted.
OR function
AND function
Value: 3 = Area output (area 1 ... 8)
0b00000001
Value: 0
Normal - light switching
1
32
1
0
Output 1 if all beams are
free or as long as 1 ... 31
beams are free.
Output 0 if 32 beams are
interrupted.
Output 0 if all beams are
free or as long as 1 ... 31
beams are free.
Output 1 if 32 beams are
interrupted.
The area output signals the logical states of beam
areas 1 ... 8
Every area is displayed as a bit.
CSL 710
Example configurations
Value: 1
Inverted - dark switching
1
32
1
0
Output 0 if all beams are
free.
Output 1 as soon as a
beam is interrupted.
Output 1 if all beams are
free.
Output 0 as soon as a
beam is interrupted.
65
Advertisement
Table of Contents
