Table of Contents
Advertisement
The Installation Wizard installs the software and places a shortcut on the desktop (
11.2.3 Connecting IO-Link USB master to the PC
The light curtain is connected to the PC via the IO-Link USB master (see table 16.8).
Connect the IO-Link USB master to the plug-in power supply unit or the mains supply.
Included in the delivery contents of the IO-Link USB master is a USB interconnection cable for
connecting the PC to the IO-Link USB master as well as a plug-in power supply unit and a short
description.
The mains supply of the IO-Link USB master via the plug-in power supply unit is only activated
if IO-Link USB master and PC are connected via the USB interconnection cable.
Connect the PC to the IO-Link USB master.
1
1
2
3
Figure 11.1: PC connection via the IO-Link USB master
The wizard for searching for new hardware starts and installs the driver for the IO-Link USB master on
the PC.
11.2.4 Connect the IO-Link USB master to the light curtain
Prerequisites:
• IO-Link USB master and PC are connected via the USB interconnection cable.
• IO-Link USB master is connected to the mains supply with the plug-in power supply unit.
NOTICE
Connect the plug-in power supply unit for IO-Link USB master!
To connect a light curtain, the plug-in power supply unit must be connected to the IO-Link USB master
and the mains supply.
The voltage supply via the USB interface of the PC is permissible only for IO-devices with a current
consumption of up to 40 mA at 24 V.
Included in the delivery contents of the IO-Link USB master is a USB interconnection cable for
connecting the PC to the IO-Link USB master as well as a plug-in power supply unit and a short
description.
The voltage supply of the IO-Link USB master and the light curtain via the plug-in power supply
unit is only activated if IO-Link USB master and PC are connected via the USB interconnection
cable.
Leuze electronic
2
IO-Link USB master
Plug-in power supply unit
PC
Connecting to a PC – Sensor Studio
3
CSL 710
).
70
Advertisement
Table of Contents
