Power Supply Card - Wca 3P6; Fieldbus Cards - Window Master MotorController WCC 310 UL Installation Instructions Manual

Power supply card – WCA 3P6
Mains and protective earth is
connected to the MotorController
via the power supply card.
S4 X1 Connection to mains.
S4 X2
AUX connection to WCA 3CP.
S4 X3
Connection to power supply WCA 3P3 (10A) or WCA 3P4 (20A)
Protective earth (PE).

Fieldbus cards

Different versions of fieldbus cards are available
- WCA 3FK
- WCA 3FM
- WCA 3FB
The connection of a fieldbus card enables communication and access to the available bus-objects depending on the chosen
system. There is a set of KNX and BACnet objects available for each motor line and motor group, which provides the options for
status and commands.
Status options
E.g. actual position, fault and operation status and the max opening angle (degrees).
Command options
E.g. target position commands with different priority and MotorLink
Description.pdf" and BACnet PICS for further information on available KNX and BACnet communication objects.
Fieldbus card with KNX interface
Fieldbus card with BACnet MSTP interface
Fieldbus card with BACnet IP interface
®
actuator speed. See "WCA 3FK Application Programming
23