Table of Contents
Advertisement
12.13.2
BACnet configuration
Status – main menu
13
In 'Status' you can see the status of all the menu items that can be configured under 'Configuration' as well as e.g. the status of
the power supply and slots (inform the type of card in the slot).
Main overview: status of the system
KNX bus shall be configured in:
For all the objects the Power setting for the KNX bus must be
configured.
BACnet overview – object configuration
Overview of the BACnet objects.
For each BACnet object a direction must be configured
-
None
-
Input
-
Output
When objects are configured as inputs or outputs, the controlled
motor group or smoke zone as well as its function must also be
configured.
BACnet shall be configured in:
For all the objects
1. BACnet IP UDP port number
2. BACnet IP device instance
3. Actual position COV increment
4. Actual max. position COV increment
5. High speed COV increment
6. Wind direction COV increment
7. Register as "foreign device"
Under 'Status' is possible to view the status for:
1. Motor line
2. Motor group
3. Local input
4. Local output
5. Power supply
6. CAN (local)
7. Network
8. Slots
9. Configuration files, USB
10. System
It is not possible to configure the items in 'Status' mode.
The appendix contains all the items shown in 'Status' - see
appendix for detailed explanation.
36
Advertisement
Table of Contents
