Table of Contents
Advertisement
Manual operation and main menu
14
It is possible to operate the motor lines, the motor groups and the smoke zones direct on the touch screen.
Main overview: manual operation
Operation types
Motor lines and motor groups
They can be operated absolutely (percentage of full open) or relatively on the keypad 'open/stop/close' showed on the touch
screen.
Example
Manual operation of a motor line
If 'All' is selected all the actuators are operated simultaneously.
-
-
If a motor line number is selected only the selected motor line is operated.
Motor line – overview
Configuration missing – main menu
15
If any components, motor lines or motor groups are not configured they are listed here. If you are logged into access level 3 it is
also possible to configure from this menu.
Hardware error – main menu
16
If there are any hardware error on the MotorController, they will be displayed here. E.g. if the motor lines are not configured, the
main supply is cut of, the type of weather station is not selected etc. If you are logged into access level 3 it is also possible to
configure from this menu.
View all details – main menu
17
To make the configuration of the MotorController as simple as possible during configuration, it is only possible to configure the
most used functions.
Under 'View all details' is displayed all of the above functions together with detailed functions that are not used as often, but are
possible to configure. If you are logged into access level 3 it is also possible to configure from this menu.
It is possible to view all details for:
Motor line
Motor group
Local input
Local output
Weather
Power supply
Network
KNX-bus
BACnet
Slots
Log in
Configuration files, USB
System
What to be manually operated:
1. Motor line – see text below
2. Motor group
One motor line is selected
Manual operation on the touch screen
37
Advertisement
Table of Contents
