Table of Contents
Advertisement
Rotation of the touch screen
The picture on the touch screen can be rotated 180°
Configuration – main menu
12
All connected components (actuators, keypads, weather station etc.) are to be configured.
As the MotorController has pre-settings for PIN code for access to level 3, the code is to be entered before it is possible to begin
the configuration (see chapter 12.10 "Log in").
Before starting on the configuration it can be an advantage to change some of the pre-set settings. Ex. the language can be
changed from English to Danish or German (see chapter 12.12 "System") and the orientation of the text on the touch screen can
be rotated for a better viewing angle (see chapter 12.12 "System"). It is also possible to change the log out time, which is the
time that the access to the access level is open/the touch screen in on (see chapter 12.10 "Log in")
To configure a sub menu:
→ press the light blue number field
→ enter value / the number of the motor line / change factory settings etc. The setting which can be entered depends of the
type of the sub menu.
→ accept on
A menu can consist of more screen plays. To get to the next screen: → press
Motor lines – motor groups
All the components are to be assigned to groups:
-
motor lines are to be assigned to motor groups
-
keypads are to be assigned to one or more motor groups
12.1.1 Examples with motor lines / motor groups
- 6 motor lines: one or more actuators connected to the lines
- 3 motor groups: the actuators in the motor group are operated simultaneously on the keypad
25
Advertisement
Table of Contents
