Table of Contents
Advertisement
®
MotorLink
motor configuration
12.2.3 Colour code - motor line
The overview fields on the touchscreen have colour codes for the motor lines:
Colour
Yellow triangle icon
Strikethrough grey
Black text
Green
Light grey number
Blue ?
Motor group
Motorlines can be assigned to motor groups. See the example "Example of motor lines / motor groups" in the beginning of this
chapter for further details.
12.3.1 Motor group - configuration
Press "Motor group" and the overview of the motor groups in the MotorController is shown.
Motor group overview
12.3.2 Colour code – motor group
The overview fields on the touch screen have colour codes for the motor groups:
Colour
Yellow triangle icon
Black text
Green field
Light grey number
Blue ?
®
The MotorLink
actuators are to be configured in:
1. Output mode: informs the type of the actuator selected
2. Expected no. of motors (displayed if actuator type =
MotorLink
3. Motor group
4. Expected no. of locking motors
4.1 No. of found locking motors (see appendix)
The appendix contains all the menus that can be configured - see
appendix for detailed explanation.
Meaning
Fault in the configuration or actuator
No configuration of the motor line / the motor line doesn't exists
The motor line are configured, the actuator has not been closed
The motor line has been configured; the actuator has been closed
®
MotorLink
motor lines will be marked in green, if the actuator / actuators on the motor
line has been closed 100% and the point zero of the actuator has been determined.
The motor line are configured with 'No actuator are connected'
Configuration is missing
Motor group configuration
Motor groups are to be configured in:
1. Comfort open position
2. Comfort open close time
3. Wind directions where to close during alarm
The appendix contains all the items that can be configured
- see appendix for detailed explanation.
Meaning
One or more of the assigned motor lines has a failure
The motor group is configured
All the assigned motor lines are closed
The motor group is configured but no motor lines are assigned
Configuration is missing
®
)
27
Advertisement
Table of Contents
