Table of Contents
Advertisement
Remove the drives.
5.
Place an identifying label on each drive to indicate the drive bay from which it was removed.
6.
Place the drives in a static-free environment.
7.
When the service procedures are complete, return each drive to the bay in the drive drawer from which it
was removed.
Remove the FBWC module
Use this procedure to remove the FBWC module when servicing other components. To replace a failed or
broken module, see "FBWC module (on page 29)."
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching them.
CAUTION: To prevent damage to electrical components, properly ground the server blade
before beginning any installation procedure. Improper grounding can cause ESD.
Removal and replacement procedures 23
Advertisement
Table of Contents
