Table of Contents
Advertisement
Remove the system board.
12.
To replace the component:
Install the system board.
1.
Install the pass-through cable in the carrier.
2.
Be sure to route the cable under the chassis support rail.
Install the pass-through board and cable in the drive drawer.
3.
Install the capacitor cover.
4.
Install the pass-through cable cover on the drive drawer.
5.
Install the FBWC module.
6.
Install the FBWC capacitor pack.
7.
Install the access panel.
8.
Install all drives.
9.
Removal and replacement procedures 35
Advertisement
Table of Contents
