MBT-5000 L-Band Up/Down Converter System
Ethernet-based Remote Product Management
Click [Submit SNMP] to save. If it is desired to revert back to the previously assigned SNMP
designations, click [Reset] instead.
6.5.5.3
Config Pages
Select the MBT, Utility, or Redundancy hyperlink to continue.
6.5.5.3.1
Config | MBT
Use this page to configure the communications, operations, and alarms/faults handling for the
MBT-5000 base unit and separate converters.
Figure 6-4. Config | MBT page
6–15
MN-MBT5000
Revision 4
Need help?
Do you have a question about the MBT-5000 and is the answer not in the manual?
Questions and answers