Table of Contents
Advertisement
MBT-5000 L-Band Up/Down Converter System
Upgrading Firmware
3) Confirm availability of the firmware files in the temporary folder.
There are several ways you may view the contents of the temporary folder on a Windows-
based PC:
A. From the Windows Desktop:
•
Double-left-click the "MBT5000" folder saved to the Windows Desktop.
•
Use Windows Explorer to locate, and then double-left-click the "MBT5000" folder.
•
Use the Browse window ([Start] > ...Run > [Browse]) to locate, and then double-
click the "c:\MBT5000" folder.
B. Using Command-line:
•
Type "cd c:\MBT5000" at the Command-line prompt to change to the temporary
directory created earlier using Command-line.
•
Type "dir" to list the files extracted to the temporary directory from the
downloaded archive file.
The firmware files have been successfully downloaded and are now available for transfer to
the MBT-5000.
ReleaseNotes_MBT5000_#.#.#.pdf – the Firmware Release Notes PDF file.
4–7
MN-MBT5000
Revision 4
Advertisement
Table of Contents
