Table of Contents
Advertisement
MBT-5000 L-Band Up/Down Converter System
Upgrading Firmware
•
Click the Create New Folder icon in the 'Browse' window. This creates the new
folder.
•
Right-click the "New Folder" folder name, and then rename this folder to
"MBT5000" or some other convenient, unused name:
D. Use Windows Command-line to create the temporary folder.
•
First, click [Start] on the Windows taskbar, and then click the Run... icon (or,
depending on Windows OS versions prior to Windows 95, click the MS-DOS Prompt
icon from the Main Menu).
•
Next, open a Command-line window...
o For Windows 95 or Windows 98, type "command" (or, for any Windows OS
o Alternately, from [Start], select All Programs > Accessories > Command
o Finally, from the Command-line prompt (c:\>), type "mkdir MBT5000" or "md
There should now be a tempory folder created and available for placement of the firmware
file download.
versions later than Windows 98, type "cmd" or "command"):
Prompt.
MBT5000" (mkdir and md stand for make directory), and then click [OK]:
4–5
MN-MBT5000
Revision 4
Advertisement
Table of Contents
