Table of Contents
Advertisement
MBT-5000 L-Band Up/Down Converter System
Serial-based Remote Product Management
Command
Arguments for
Parameter
(Instruction
Command or
Type
Code and
Response to
Qualifier)
Retrieve
Maintenance
Status (cont.)
Serial Number
N/A
9 bytes
Temperature
N/A
4 bytes
(Note that all arguments are ASCII numeric codes between 48 and 57)
Query
Notes:
1) If the converter does not support power monitor, will display FWPWR=xxx.x.
2) If the converter does not have LNS current supply, will display LNACS=xxx.x
Query only.
Queries the unit 9-digit serial number. Unit returns its S/N in the form xxxxxxxxx.
Example: SNO=176500143
Query Only.
Returns the temperatures of the heat sink in the form a sign byte followed by 3 bytes for the
temperature.
Example: TMP=+26.0
Description of arguments
7–23
MN-MBT5000
Revision 4
Response to
Query
Response to query
Command
(Instruction
(Target to
Code and
Controller)
Qualifier)
N/A
SNO?
SNO=xxxxxxxxx
(See Description of
Arguments)
N/A
TMP?
TMP=sxxx
(See Description of
Arguments)
(Target to
Controller)
Advertisement
Table of Contents
