Telnet Interface - Comtech EF Data MBT-5000 User's Installation And Operation Manual

MBT-5000 L-Band Up/Down Converter System
Ethernet-based Remote Product Management
6.4

Telnet Interface

The MBT-5000 provides a Telnet interface for the purpose of Equipment M&C via the standard
equipment Remote Control protocol. The Telnet interface requires user login at the
Administrator level and Read/Write level. An example of the login process is shown here:
Once logged into the Telnet interface as Administrator, you can access the standard remote
control interface defined in Chapter 7. SERIAL-BASED REMOTE PRODUCT MANAGEMENT, as
shown here:
6–5
MN-MBT5000
Revision 4