Table of Contents
Advertisement
7.2
ATEX Control Drawings (Continued)
SPECIFIC CONDITIONS OF USE
1. The enclosure contains aluminum and is considered a potential risk of ignition by impact or friction.
Care must be taken into account during installation and use to prevent impact or friction.
2. The equipment shall not be applied in an explosive dust atmosphere where high electrostatic charging
processes are present that could result in propagating brush discharges. See CLC/TR 60079-32-1
for additional guidance.
61
Control Drawings
SPECIFIC CONDITIONS OF USE
SHT 9 OF 9
420-0004-175-CD ISS. 9
Advertisement
Table of Contents
