Ametek IntelliPoint RF RMT Series Installation And Operating Instructions Manual page 36

RMTXX1 Series - IntelliPoint RF™ Instruction Manual
5.4 Testing The Sensing Element (Continued)
ANALOG
OHMMETER
CENTER
TO
CONDUCTOR
GROUNDED
TO
HOUSING
PACKING
GLAND
DO NOT DISTURB
PROBE MEASUREMENT
Checking the Sensing Element
Center = Probe
Outer = Shield
Housing = Ground
Sensing Element in Vessel
Center Conductor to Housing
Center Conductor to Cote Shield _____________________ Ohms
Cote Shield to Housing
Sensing Element Cleaned
Center Conductor to Housing
Center Conductor to Cote Shield _____________________ Ohms
Cote Shield to Housing
ANALOG
OHMMETER
OUTER
TO
CONDUCTOR
GROUNDED
Red Lug
PACKING
GLAND
DO NOT DISTURB
SHIELD MEASUREMENT
Figure 5-4
_____________________ Ohms
_____________________ Ohms
_____________________ Ohms
_____________________ Ohms
Table 5-1
30
TO
HOUSING