Safety
Target group
2 - 2
2.2
Safe operation
2.2.1 Authorized use
The authorized use of the System 2020 XT C
as a sensor in the IQ S
the product according to the instructions and technical specifications
given in this operating manual is authorized (see chapter 8 T
). Any other use is considered unauthorized.
DATA
2.2.2 Requirements for safe operation
Note the following points for safe operation:
The product may only be operated according to the authorized use
specified above.
The product may only be supplied with power by the energy sources
mentioned in this operating manual.
The product may only be operated under the environmental condi-
tions mentioned in this operating manual.
The product may not be opened.
2.2.3 Unauthorized use
The product must not be put into operation if:
it is visibly damaged (e.g. after being transported)
it was stored under adverse conditions for a lengthy period of time
(storing conditions, see chapter 8 T
2.3
User qualification
The IQ S
N
ENSOR
ET
maintenance activities, e.g. changing the membrane caps in D.O. sen-
sors, require the safe handling of chemicals. Thus, we assume that the
maintenance personnel is familiar with the necessary precautions to
take when dealing with chemicals as a result of their professional train-
ing and experience.
N
. Only the operation and running of
ENSOR
ET
ECHNICAL DATA
system was developed for online analysis. Some
System 2020 XT C
ONNECT
consists of its use
ONNECT
ECHNICAL
).
ba75970e01
10/2012