Ways To Provide Power To Your Conference Phone - Cisco 8832 Administration Manual

Cisco IP Conference Phone Installation
• If you use Wi-Fi:
Step 3
Monitor the phone startup process. This step verifies that the phone is configured properly.
Step 4 If you do not use autoregistration, manually configure the security settings on the phone.
Step 5
Allow the phone to upgrade to the current firmware image that is stored on your Cisco Unified Communications
Manager.
Step 6
Make calls with the phone to verify that the phone and features work correctly.
Step 7 Provide information to the users about how to use their phones and how to configure their phone options.
This step ensures that users have adequate information to successfully use their Cisco phones.

Ways to Provide Power to Your Conference Phone

Your conference phone needs power from one of these sources:
• Power over Ethernet (PoE)
• Non-PoE Ethernet
• WiFi—Use the Cisco IP Conference Phone 8832 Power Adapter connected to an electrical outlet.
3. Plug the Ethernet cable into the Non-PoE Ethernet injector or the Ethernet injector.
4. Plug the Ethernet cable into the LAN port.
5. Connect the Non-PoE Ethernet injector or the Ethernet injector to the conference phone using a
USB-C cable.
1. Plug the Cisco IP Conference Phone 8832 Power Adapter into the electrical outlet.
2. Connect the power adapter to the conference phone using a USB-C cable.
Note Instead of the power adapter, you can use the Non-PoE Ethernet injector to get power to
the phone. However, you must unplug the LAN cable. The phone only connects to Wi-Fi
when the Ethernet connection is not available.
• North America
• Cisco IP Conference Phone 8832 PoE Injector
• Cisco IP Conference Phone 8832 Ethernet Injector
• Outside of North America—Cisco IP Conference Phone 8832 PoE Injector
• North America
• Cisco IP Conference Phone 8832 Non-PoE Ethernet Injector
• Cisco IP Conference Phone 8832 Ethernet Injector with a Cisco IP Conference Phone 8832
Power Adapter connected to an electrical outlet.
• Outside of North America—Cisco IP Conference Phone 8832 Non-PoE Ethernet Injector
Cisco IP Conference Phone 8832 Administration Guide for Cisco Unified Communications Manager
Ways to Provide Power to Your Conference Phone
29