Set The Number Of Wlan Authentication Attempts - Cisco 8832 Administration Manual

Cisco IP Conference Phone Installation
Option
IPv4 setup
IPv6 setup
MAC address
Domain name
Step 4 Press Save to make changes or press Revert to discard the connection.

Set the Number of WLAN Authentication Attempts

An authentication request is a confirmation of the user's sign-in credentials. It occurs whenever a phone that
has already joined a Wi-Fi network tries to reconnect to the Wi-Fi server. Examples include when a Wi-Fi
session times out or a Wi-Fi connection is lost and then reacquired.
Description
In the IPv4 Setup configuration
submenu, you can do the following:
For more information about the
IPv4 address fields, see the "IPv4
Setup Submenu" table.
In the IPv6 setup configuration
submenu, you can do the following:
For more information about the
IPv6 address fields, see the "IPv6
Setup Submenu" table.
Unique Media Access Control
(MAC) address of the phone.
Name of the Domain Name System
(DNS) domain in which the phone
resides.
Cisco IP Conference Phone 8832 Administration Guide for Cisco Unified Communications Manager
Set the Number of WLAN Authentication Attempts
• Enable or disable the phone to
use the IP address that the
DHCP server assigns.
• Manually set the IP Address,
Subnet Mask, Default Routers,
DNS Server, and Alternate
TFTP servers.
• Enable or disable the phone to
use the IPv6 address that is
either assigned by DHCPv6
server or acquired by SLAAC
through an IPv6-enabled
router.
• Manually set the IPv6
Address, Prefix Length,
Default Routers, DNS Server,
and Alternate TFTP servers.
To change
Scroll to IPv4 setup and press
Select.
Scroll to IPv6 setup and press
Select.
Display only. Cannot configure.
See Set Domain Name Field, on
page 42.
45