Cisco 8832 Administration Manual page 158

Streaming Statistics Web Page
Item
Sender Packets
Sender Octets
Sender Codec
Sender Reports Sent
(see note)
Sender Report Time Sent
(see note)
Rcvr Lost Packets
Avg Jitter
Receiver Codec
Receiver Reports Sent
(see note)
Receiver Report Time Sent
(see note)
Rcvr Packets
Cisco IP Conference Phone 8832 Administration Guide for Cisco Unified Communications Manager
148
Cisco IP Conference Phone Troubleshooting
Description
Total number of RTP data packets that the phone
transmitted since it started this connection. The value
is 0 if the connection is set to receive-only mode.
Total number of payload octets that the phone
transmitted in RTP data packets since it started this
connection. The value is 0 if the connection is set to
receive-only mode.
Type of audio encoding that is for the transmitted
stream.
Number of times the RTCP Sender Report has been
sent.
Internal time-stamp indication as to when the last
RTCP Sender Report was sent.
Total number of RTP data packets that have been lost
since data reception started on this connection.
Defined as the number of expected packets less the
number of packets actually received, where the
number of received packets includes any that are late
or are duplicates. The value displays as 0 if the
connection was set to send-only mode.
Estimate of mean deviation of the RTP data packet
interarrival time, measured in milliseconds. The value
displays as 0 if the connection was set to send-only
mode.
Type of audio encoding that is used for the received
stream.
Number of times the RTCP Receiver Reports have
been sent.
Internal time-stamp indication as to when a RTCP
Receiver Report was sent.
Total number of RTP data packets that the phone has
received since data reception started on this
connection. Includes packets that were received from
different sources if this call is a multicast call. The
value displays as 0 if the connection was set to
send-only mode.