Phone Does Not Power Up; Phone Cannot Connect To Lan; Cisco Ip Phone Security Problems; Ctl File Problems - Cisco 8832 Administration Manual

Cisco IP Conference Phone Troubleshooting

Phone Does Not Power Up

Problem
The phone does not appear to be powered up.
Solution
In most cases, a phone restarts if it powers up by using external power but loses that connection and switches
to PoE. Similarly, a phone may restart if it powers up by using PoE and then connects to an external power
supply.

Phone Cannot Connect to LAN

Problem
The physical connection to the LAN may be broken.
Solution
Verify that the Ethernet connection to which the Cisco IP Phone connects is up. For example, check whether
the particular port or switch to which the phone connects is down and that the switch is not rebooting. Also
ensure that no cable breaks exist.

Cisco IP Phone Security Problems

The following sections provide troubleshooting information for the security features on the Cisco IP Phone.
For information about the solutions for any of these issues, and for additional troubleshooting information
about security, see Cisco Unified Communications Manager Security Guide.

CTL File Problems

The following sections describe troubleshooting problems with the CTL file.

Authentication Error, Phone Cannot Authenticate CTL File

Problem
A device authentication error occurs.
Cause
CTL file does not have a Cisco Unified Communications Manager certificate or has an incorrect certificate.
Solution
Install a correct certificate.
Cisco IP Conference Phone 8832 Administration Guide for Cisco Unified Communications Manager
Phone Does Not Power Up
165