Cisco 8832 Administration Manual page 108

Product Specific Configuration
Field Name Field Type
Or Choices
Allow EnergyWise Check box
Overrides
Join And Direct Transfer Same line enable
Policy
Same line disable
Recording Tone Disabled
Enabled
Cisco IP Conference Phone 8832 Administration Guide for Cisco Unified Communications Manager
98
Default Description
Unchecked Determines whether you allow the EnergyWise domain
controller policy to send power level updates to the
phones. The following conditions apply:
• One or more days must be selected in the Enable
• The settings in Cisco Unified Communications
For example, assuming the Phone Off Time is set to
22:00 (10:00 p.m.), the value in the Phone On Time
field is 06:00 (6:00 a.m.), and the Enable Power Save
Plus has one or more days selected.
• If EnergyWise directs the phone to turn off at
• At 6:00 a.m., the phone turns on and resumes
• To change the power level on the phone again,
To disable Power Save Plus, you must uncheck the
Allow EnergyWise Overrides check box. If the Allow
EnergyWise Overrides remains checked but no days
are selected in the Enable Power Save Plus field, Power
Save Plus is not disabled.
See Set Up
Same line, across line Controls the ability of a user to join and transfer calls.
enable
• Same line enable—Users can directly transfer or
• Same line disable— Users can't join or transfer
Disabled Controls the playing of the tone when a user is
recording a call
Cisco IP Conference Phone Administration
Power Save Plus field.
Manager Administration take effect on schedule
even if EnergyWise sends an override.
20:00 (8:00 p.m.), that directive remains in effect
(assuming no phone user intervention occurs)
until the configured Phone On Time at 6:00 a.m.
receiving the power level changes from the
settings in Cisco Unified Communications
Manager Administration.
EnergyWise must reissue a new power level
change command.
EnergyWise.
join a call on the current line to another call on
the same line.
calls on the same line. The join and transfer
features are disabled and the user can't do the
direct transfer or join function.