CHAPTER The Cisco IP Conference Phone 8832 The Cisco IP Conference Phone 8832 provides high-definition (HD) audio performance and 360-degree coverage for medium to large conference rooms and executive offices. The conference phone has sensitive microphones that let you speak in a normal voice and be clearly heard from up to 10 feet (2.1 m) away.
Cisco IP Phone 8832 Series User Guide Cisco IP Conference Phone 8832 PoE Injector with the PoE power option. Connect to the Network You need to connect the phone to the telephone network. • Wired connection—the phone is plugged into the network using an Ethernet cable.
Cisco IP Phone 8832 Series User Guide Disconnect the wired expansion microphones before you install wireless expansion microphones. You cannot use both wired and wireless expansion microphones at the same time. Procedure Step 1 Position the table mount plate on the table surface location where you want to place the microphone.
Cisco IP Phone 8832 Series User Guide Charge a Wireless Microphone Before you begin Install the wireless microphone charging cradle. Procedure Step 1 Place the microphone in the charging cradle. Step 2 If the LED on the cradle is not white, remove the microphone and replace it in the cradle.
Cisco IP Phone 8832 Series User Guide Cisco IP Phone 8832 Buttons and Hardware The following figure shows the Cisco IP Conference Phone 8832. Figure 5: Cisco IP Conference Phone 8832 Buttons and Features Mute bar Toggle the microphone on or off. When the microphone is muted, the LED bar is lit red.
Cisco IP Phone 8832 Series User Guide Conference Phone Navigation Use the Navigation bar to scroll through menus. Use the inner Select button of the Navigation bar to select menu items. If a menu item has an index number, you can enter the index number with the keypad to select the item.
Cisco IP Phone 8832 Series User Guide Wired Expansion Microphone The Cisco IP Conference Phone 8832 supports two wired expansion microphones, available in an optional kit. Use of the expansion microphones allows greater coverage in a larger room and for more people. For best results, we recommend that the microphones be placed between 3 feet (0.91 m) and 7 feet (2.1 m) away from the...
Accessibility Features The Cisco IP Conference Phone 8832 provides accessibility features for the blind, and the visually, hearing, and mobility impaired. Because many of these features are standard, users with disabilities can access them without any special configuration.
• MAC address—Unique Media Access Control (MAC) address of the phone. • Host name—Displays the current host name assigned to the phone. • Domain—Displays the network domain name of the phone. Default: cisco.com • Switch port link—Status of the switch port.
Cisco IP Phone 8832 Series User Guide Procedure Step 1 Press Settings. Step 2 Select Network configuration > Ethernet configuration > 802.1X authentication > Transaction status. You can view the following information: • Transaction status • Protocol View the Reboot History Procedure Step 1 Press Settings.
You can call the most recently dialed phone number. Procedure Press Redial. Answer Calls Your Cisco IP Phone works just like a regular phone. But we make it easier for you to answer calls. Answer a Call Procedure Press Answer.
Cisco IP Phone 8832 Series User Guide Decline a Call You can send a ringing call to your voicemail system or to a preset phone number. Procedure Press Decline. Do Not Disturb You can turn on or off the do not disturb feature by dialing the respective star codes that are configured.
Cisco IP Phone 8832 Series User Guide Answer a Call Left on Hold for Too Long When you've left a call on hold too long, you'll be notified with these cues: • Single ring, repeating at intervals • Flashing LED bar •...
Cisco IP Phone 8832 Series User Guide Retrieve a Call on Hold with Call Park You can pick up a parked call from anywhere in your network. Before you begin You need the number that was used to park the call.
Cisco IP Phone 8832 Series User Guide Consult Before You Complete a Transfer Before you transfer a call, you can talk to the person that you're transferring the call to. You can also swap between that call and the call that you're transferring, before you complete the transfer.
Cisco IP Phone 8832 Series User Guide Step 1 While you are in a conference, press Details to view a list of participants. Step 2 (Optional) Highlight a participant and press Remove to drop the participant from the conference. 17 |...
Cisco IP Phone 8832 Series User Guide CHAPTER Recent Calls Recent Calls List Use the Recents list to see the 150 most recent individual calls and call groups. If your Recents list reaches the maximum size, the next new entry overwrites the oldest entry in the list.
Cisco IP Phone 8832 Series User Guide CHAPTER Settings Change the Ringtone You can change the sound that your phone uses for incoming calls. Procedure Step 1 Select Settings > Preferences > Ringtone. Step 2 Scroll through the list of ringtones and press Play to hear a sample.