Cisco 8832 Administration Manual page 49

Cisco IP Conference Phone Installation
Entry
SW Port Setup
LLDP-MED: SW Port
Table 6: IPv4 Setup Submenu
Entry
DHCP
IP Address
Subnet Mask
Default Router 1
DNS Server 1
DNS Server 2
DNS Server 3
Alternate TFTP
Type
Auto Negotiate
10 Half
10 Full
100 Half
100 Full
Disabled
Enabled
Type
Disabled
Enabled
No
Yes
Cisco IP Conference Phone 8832 Administration Guide for Cisco Unified Communications Manager
Default Description
Auto Negotiate Speed and duplex of the switch port,
where:
• 10 Half = 10-BaseT/half duplex
• 10 Full = 10-BaseT/full duplex
• 100 Half = 100-BaseT/half duplex
• 100 Full = 100-BaseT/full duplex
Enabled Indicates whether Link Layer Discovery
Protocol Media Endpoint Discovery
(LLDP-MED) is enabled on the switch
port.
Default Description
Enabled Enables or disables the use of DHCP.
Internet Protocol version 4 (IPv4)
address of the phone.
To change this field, turn off DHCP.
Subnet mask that the phone uses.
To change this field, turn off DHCP.
Default router used that the phone uses.
To change this field, turn off DHCP.
Primary Domain Name System (DNS)
server (DNS Server 1) that the phone
uses.
To change this field, turn off DHCP.
Primary Domain Name System (DNS)
server (DNS Server 2) that the phone
uses.
Primary Domain Name System (DNS)
server (DNS Server 3) that the phone
uses.
No Indicates whether the phone is using an
alternative TFTP server.
Network Setup Fields
39