Cisco 8832 Administration Manual page 111

Cisco IP Conference Phone Administration
Field Name Field Type
Or Choices
FIPS Mode Disabled
Enabled
Record Call Log from Disabled
Shared Line
Enabled
Minimum Ring Volume 0 - Silent
1–15
Peer Firmware Sharing Disabled
Enabled
Load Server String of up to 256
characters
IPv6 Load Server String of up to 256
characters
Default
Disabled
Disabled
0 - Silent
Enabled
Cisco IP Conference Phone 8832 Administration Guide for Cisco Unified Communications Manager
Product Specific Configuration
Description
Enables or disables the Federal Information Processing
Standards (FIPS) mode on the phone.
Specifies whether to record call log from a shared line.
Controls the minimum ring volume for the phone.
Allows the phone to find other phones of the same
model on the subnet and share updated firmware files.
If the phone has a new firmware load, it can share that
load with the other phones. If one of the other phones
has a new firmware load, the phone can download the
firmware from the other phone, instead of from the
TFTP server.
Peer firmware sharing:
• Limits congestion on TFTP transfers to
centralized remove TFTP servers.
• Eliminates the need to manually control firmware
upgrades.
• Reduces phone downtime during upgrades when
large numbers of phones are reset simultaneously.
• Helps with firmware upgrades in branch or remote
office deployment scenarios that run over
bandwidth-limited WAN links.
Identifies the alternate IPv4 server that the phone uses
to obtain firmware loads and upgrades.
Identifies the alternate IPv6 server that the phone uses
to obtain firmware loads and upgrades.
101